Sampling
As part of the
product manufacturing process, samples have to be taken
during the drying process, and transported to the
laboratory in a contained manner.
Many products manufacture today are very expensive, even
for the most minute quantity, ACE manufacture a range of
containment systems, to allow the safe recovery of the
product heel, to be found on the membrane surface of the
dryer. |
Please
click images to enlarge:
|
HEEL REMOVAL MODULE
The Heel Removal Isolator is a
single chamber device designed specifically for
product recovery from a Filter Dryer.
The unit is fabricated out of 316L grade stainless steel
and is fully welded crack and crevice free to provide a
smooth internal finish.
The Isolator is furnished with
glove ports in a glazed vision panel and is closed
coupled to the fileter dryer, for product recovery.
The Isolator works under negative pressure via a remote
extraction system with the interior of the glove box
inert under nitrogen. HEPA filters are fitted to the
nitrogen inlet and the extraction take off point and
determine the containment barrier. |
Heel Removal Module
|
